Size: Fits standard duct opening of 12"x 12" (Overall Face Plate size 13-1/2"x 13-7/8")
Handcrafted Product: Each piece is Handmade using traditional sand-casting process not bulk produced
Solid Metal: Face plate made using solid cast Aluminum and not machine-made sheet metal
Rust-Free Metal: Rust and corrosion resistant in any weather condition
Recyclable Material and No Plastic Part: Recyclable metal and are plastic-free
Durable Finish: Powder-coated fine grain matte finish baked at high temperature
Louvers/ Dampers : The vents are provided with detachable and adjustable metal louvers to control air flow.
Optimal Airflow: Designed for optimal air outlet for hot and cold air
Easy to Clean: Can be cleaned with a soft brush and damp cloth
Re-paintable: White grills may be spray painted with metal spray paint
Patent Design: Achtek grille: Patent design 196854.
ORDERING CORRECT SIZE: Always measure the duct opening size to determine which size to purchase. This size fits a standard duct opening of 12”x12”. To measure your duct opening for a 12" x 12" vent, simply measure the width and length of the inside edges of the duct opening. The width should be 2 inches, and the length should be 10 inches. Ensure your measurements are taken from edge to edge for an accurate fit. Do not measure the old vent cover, remove the old vent and measure the duct opening.
EASE OF INSTALLATION:
For Floor: installation is gravity drop.
The Achtek Vent from Registers & Hardware fits seamlessly into floor openings without the need for tools ensuring a quick and hassle-free setup. This makes the installation process smooth and efficient, ensuring your vent covers are securely and aesthetically installed.
For Wall/Ceiling: Counter sunk screw holes, provided with matching screws.
Louvers / Dampers: The grilles come with detachable and adjustable metal louvers, featuring horizontal parallel slats, fins, or blades. These can be manually opened or closed using a lever on one side of the vent to regulate airflow from the air duct. The louvers/dampers are secured to the vent face with machine screws, allowing for easy removal or reattachment as needed.
Durability & Quality Material: Handcrafted in Solid Sand Cast Aluminum with heavy gauge face plate thickness of approx. 3/16" (4.76 mm), these vent covers are built for durability. Aluminum metal has property of being rust and corrosion resistant in any weather condition.
Sturdy: Our vent covers are suitable for cool and hot airflow as well as fireplace grills. The heat-cured, fine grain powder-coated finish ensures durability and long-lasting performance.
Rust-Resistant: The durable metal construction ensures easy maintenance and long-lasting quality. Rust-free metal makes Achtek vent covers ideal for both residential and commercial use and may be used indoors as well as outdoors.
Versatile Usage: Suitable for kitchens, bathrooms, living rooms, bedrooms, dining rooms, offices, dens, foyers, hallways, porches, and garages, these versatile vents ensure proper ventilation throughout your space.
Design: The Achtek design is an octagonal design representing the number eight which is symbolic of Renewal and Regeneration and as per Feng Shui is considered a symbol of protection & to ward off negativity. It is also seen as a symbol of good health and fortune.
Quiet Operation: Our vents are crafted to operate quietly and prevent any rattling noises, ensuring a peaceful and enjoyable environment in your space.
Recyclable and Sustainable: Upgrade your home with our recyclable and sustainable vent covers, designed to combine eco-friendly materials with lasting durability. Each cover is thoughtfully crafted to minimize environmental impact while enhancing the beauty and functionality of your space. By choosing our vent covers, you’re making a conscious decision to support a greener future without compromising on quality or style. Perfect for any renovation, they offer a seamless blend of sustainability and performance. Invest in a better tomorrow with vent covers that are built to last and made from recyclable Aluminum metal.
Warning: California's Proposition 65
• Standard Tracked - We use UPS / Fed Ex and Purolator for most of our deliveries. The packages are usually delivered within 1 to 7 days depending on the location
• We try our best to dispatch all orders within 1 - 2 working days but during busy period this may increase to 3 to 5 working days depending on volumes and staff issues. Please note this only applies to stock items, other items may take longer
• Orders placed on a Friday, over the weekend and Holidays will be processed the next working day. We do not dispatch the same day so please allow 1 - 2 days for your order to be dispatched. If you require your order urgently please call us on +647-877-2322 before placing your order
• Our courier partners do not deliver to PO box numbers. Alternatively we may use Canada Post / USPS for PO box addresses, but in that case delivery time might be longer. Always try and provide a full postal address
• Providing your phone number while placing your order is always helpful as the courier company may contact you in case of any issue
• NOTE: We will contact you if, for any reason, we are unable to fulfil your online order from our warehouse
WHERE IS MY ORDER?
You may mail us at info@registersandhardware.com or call at 647-877-2322
CUSTOMS CHARGES-
All parcels if applicable for a custom charge are to be paid by the customer.
Import duties and handling fees are not our responsibility. If you refuse to accept delivery and we have to organise the order to be returned to us, you will have to pay the courier and any duty costs out of any refund we make to you. Registers and Hardware Hub Inc. cannot be held responsible for any charges that customs enforce on a parcel.
In case the address changes after dispatch of order, the extra cost taken by the courier will have to be borne by the customer
In case the parcel is returned to us due to a wrongly provided postal address, the return charges will be deducted from your account.
Registers and Hardware Hub Inc.
www.registersandhardware.com/
RETURNS
If your item is unwanted or the wrong size and has not been used or installed in any way,
you may contact us to get a RETURN AUTHORIZATION NUMBER within 15 days of receiving
the order. A restocking fee of 20% will apply and there will be no credit for shipping charges
and return shipping charges. There is no exchange or return on custom orders and on
special finishes.
Please include a copy of your original invoice and the RMA number along with a note stating
the reason for your return.
All returns will be credited only once products are inspected and found to be in their original
packaging. Products returned in acceptable condition will be credited at the net value on
the invoice, minus restocking fees and shipping charges.
CUSTOM SIZE AND SPECIAL FINISH ORDER ARE NON-REFUNDABLE OR RETURNABLE.
ORDER ISSUES
Any order issues including damaged, duct size or finish need to be reported within 3 weeks
from arrival in order for us to replace. Please check all items on arrival to ensure everything
is undamaged and to correct size.
PACKING YOUR RETURN
Please ensure goods are packaged properly as damaged items will not be refunded in full. As
most of our items are powder coated they are susceptible to being chipped if not handled
properly or packaged thoroughly.
SENDING YOUR RETURN
We do not pay for returns unless the item is damaged or incorrect. In case damaged or
incorrect size is received, it will be replaced and not refunded.
For any query regarding incorrect or damaged item please contact
us via info@registersandhardware.com. If you can attach some photos showing the
incorrect duct opening size or damage part this would be appreciated. We will then send
you a return label.
If you wish to return your item for another reason, e.g. 'the item is not suitable or ordered a
wrong duct size' then please arrange return shipping yourself.
INTERNATIONAL RETURNS
If returning from outside Canada, please contact us first. It is advisable to return them via
USPS and mark “RETURN” on the box label to avoid high brokerage fee. Any Duties or Tax
charges incurred will be charged against the refund amount.
RETURN ADDRESS
Returns
Registers and Hardware Hub Inc.
356 Fesserton Road,
Richmond Hill,
Ontario, L4C1G1
Ph: 647 877 2322
